Belden- Belden 2412 Series (Cat6+)
BELDEN FIBER OPTIC CABLE 2412 SERIES (CAT6+)
FEATURES
High-Performance Category 6+ Transmission
Supports up to 350 MHz bandwidth with stable signal-to-noise ratio, ensuring reliable Gigabit Ethernet and high-speed data applications.
Optimized Internal Design for Signal Integrity
Uses a patented dielectric tape separator and matched conductor pairs to minimize crosstalk and maintain consistent electrical performance.
Compact and Flexible Installation
Small cable diameter design allows easier routing in conduits and high-density installations while maintaining durability.
Wide Application Compatibility
Designed for premise horizontal cabling including Gigabit Ethernet, ATM, and PoE/PoE+ systems.
Durable Construction for Long-Term Use
Built with solid bare copper conductors, polyolefin insulation, and PVC jacket with ripcord for easier stripping and installation.
SPECIFICATIONS
Category: Cat6+ (350 MHz)
Cable Type: U/UTP (Unshielded Twisted Pair)
Conductors: 4 pairs (8 conductors)
Conductor Size: 23 AWG solid bare copper
Insulation Material: Polyolefin
Jacket Material: PVC
Separator: Patented dielectric tape
Nominal Diameter: ~5.6 mm
Ripcord: Yes
Applications: Gigabit Ethernet, 100BaseTX, ATM, PoE/PoE+
Temperature Range: -20°C to +75°C
Impedance: ~100 Ohms
Velocity of Propagation: ~70%
BELDEN FIBER OPTIC CABLE 1872A SERIES (CAT6)
FEATURES
Bonded-Pair Technology for Superior Performance
Each pair is bonded together to maintain twist geometry, significantly improving noise immunity and signal consistency.
Enhanced Category 6 Data Handling
Designed for high-speed data networking with improved electrical stability compared to standard Cat6 cables.
Robust Mechanical Strength
Supports higher pulling tension and improved bend resistance, making it suitable for demanding installations.
Reliable Network Transmission Characteristics
Provides low delay skew and stable capacitance for consistent performance across long cable runs.
Standards-Compliant and Safe Design
UL-rated and RoHS compliant, ensuring safety and environmental compliance.
SPECIFICATIONS
Category: Enhanced Cat6
Cable Type: Bonded-Pair UTP (Unshielded)
Conductors: 4 pairs (8 conductors)
Conductor Size: 23 AWG solid bare copper
Insulation Material: Polyolefin
Jacket Material: PVC
Nominal Diameter: ~0.365 in
Ripcord: Yes
Operating Temperature: -20°C to +80°C
Velocity of Propagation: ~70%
Max Delay: 510 ns/100 m @100 MHz
Delay Skew: 25 ns/100 m
Max Voltage: 300 Vrms
Max Conductor Resistance: 7.5 Ohms/100 m
Compliance: UL Rated, RoHS Compliant
BELDEN FIBER OPTIC CABLE 50106HFP HIGH-FLEX INDUSTRIAL CABLE
FEATURES
High-Flex Industrial Ethernet Performance
Designed for continuous motion applications such as robotics, drag chains, and moving machinery with long flex life and torsion resistance.
Shielded Construction for Noise Protection
SF/UTP design with overall foil and braided shielding ensures strong EMI/RFI protection in harsh industrial environments.
Rugged and Durable Industrial Design
Halogen-free PUR jacket provides resistance to oil, sunlight, and abrasion for indoor and outdoor industrial use.
Reliable High-Speed Data Transmission
Supports Gigabit Ethernet, EtherCAT, and industrial protocols with stable signal integrity up to 250 MHz.
Certified and Standards-Compliant Operation
Meets IEC flame ratings and industrial Ethernet certifications for safe and compliant deployment.
SPECIFICATIONS
Category: Cat6 Industrial Ethernet
Cable Type: SF/UTP (Foil + Braid Shielded)
Conductors: 4 pairs (8 conductors)
Conductor Size: 26 AWG stranded bare copper
Insulation Material: Polyethylene (PE)
Jacket Material: Halogen-free PUR
Nominal Diameter: ~7.0 mm
Shield Coverage: Foil 100% + Braid 85%
Impedance: 100 Ohms
Frequency: Up to 250 MHz
Temperature Range: -25°C to +80°C
Applications: Industrial Ethernet, PLC, robotics, automation
Compliance: IEC 60332, ISO/IEC 11801, RoHS
BELDEN FIBER OPTIC CABLE MPO/MTP TRUNK FIBER CABLES
FEATURES
Pre-Terminated High-Density Connectivity
Factory-terminated MPO/MTP connectors enable fast deployment and reduced installation time.
Optimized for Data Center Scalability
Supports migration to 40G and 100G networks with high-density fiber connectivity.
Low-Loss Connector Performance
Provides excellent insertion loss performance (as low as 0.2 dB for OM4) ensuring efficient signal transmission.
Lightweight and Easy Installation Design
Advanced pulling eye and lightweight cable construction simplify routing and handling.
Standards-Validated Quality Assurance
Fully tested against TIA standards for consistent and reliable performance.
SPECIFICATIONS
Cable Type: MPO/MTP Trunk Fiber
Fiber Types: OM3, OM4, OM5, OS2
Fiber Count: 12, 24, or higher
Insertion Loss: ~0.2–0.35 dB (OM4 typical)
Return Loss: Up to 60 dB (APC)
Connector Type: MPO-12 / MPO-24
Applications: Data centers, backbone, high-speed networks
Jacket: Plenum / LSZH
Standards: TIA/EIA, ISO/IEC
