CyberPower - CP1500AVRT
CYBERPOWER UPS & AVR CP1500AVRT
FEATURES
Line-interactive topology with AVR
The UPS uses Automatic Voltage Regulation to correct voltage dips or surges without switching to battery.
Battery backup and surge protection
Provides full-time surge protection plus battery runtime to safely shut down connected devices during power outages.
GreenPower UPS™ efficiency design
Incorporates bypass circuitry to lower energy loss and heat when mains input is within acceptable ranges.
Wide surge & data protection
Includes RJ-45 and coax (RG6) protection for network / cable lines.
SPECIFICATIONS
Capacity: 1500 VA / 900 W.
Topology: Line-interactive with AVR.
Output waveform (on battery): Simulated sine wave.
Input voltage range: 88 VAC – 144 VAC (for 120 V variant)
Typical transfer time: ~8 ms
Outlets: 10 total (5 battery backup + surge, 5 surge-only)
Surge energy rating: ~1500 Joules.
Data-line protection: Network (RJ-45) and coaxial (RG-6) lines.
Runtime (approx): ~11 minutes at half-load; ~3 minutes at full-load (varies)
Battery recharge time: ~8 hours
Weight: ~10.9 kg (~24 lb)
CYBERPOWER UPS & AVR CP1500AVRLCD3
FEATURES
Line-interactive topology with AVR
Uses AVR to stabilize voltage variation without switching to battery except under more severe conditions.
Simulated sine wave output
When operating on battery, output is a simulated (stepped) sine wave.
Surge + battery protection
Provides battery runtime and surge protection for connected devices.
Multifunction LCD interface
The LCD panel shows input/output metrics, battery status, load, runtime, alerts, etc.
Data line protection & filtering
Supports protection for Ethernet / coax lines and includes EMI/RFI filtering.
SPECIFICATIONS
Rated Capacity: 1500 VA / 900 W.
Topology: Line-interactive with AVR.
Output Waveform (on battery): Simulated sine wave.
Output Voltage (on battery): 120 VAC ± 5%.
Typical Runtime: ~12 minutes at half load; ~3 minutes at full load.
Battery: 2 × 12 V / 9 Ah sealed lead-acid (user-replaceable) with typical recharge time ~8 hours.
Outlets: 12 total (6 battery + surge protected; 6 surge only).
USB Charge Ports: 2 (1 × USB-A ~2.4 A, 1 × USB-C ~15 W) for charging mobile devices.
Surge Protection & EMI/RFI Filtering: Yes; ~1500 Joules surge energy rating.
Input Voltage/Plugs (US variant): 120 V nominal; plug type NEMA 5-15P; cord length ~1.8 m.
Dimensions (W × H × D): Approx. 99 mm × 279 mm × 356 mm (3.9″ × 11.0″ × 14.0″).
Weight: Approx. 10.8 kg (23.8 lbs).
CYBERPOWER UPS & AVR CP1350AVRLCD3
FEATURES
Line-interactive topology with AVR
The UPS uses AVR to correct minor voltage fluctuations without switching to battery mode.
Simulated sine wave output
Outputs a stepped sine wave during battery mode.
Surge + battery protection
Combines battery backup and surge suppression for connected devices.
Multifunction LCD interface
The LCD shows input/output status, battery levels, estimated runtime, alerts, etc.
Data line protection & filtering
Supports protection for Ethernet / coax lines plus EMI/RFI filtering.
SPECIFICATIONS
Rated Capacity: 1500 VA / 900 W.
Topology: Line-interactive with AVR (boost +10%, buck -10%).
Output Waveform (on battery): Simulated sine wave.
Output Voltage (on battery): 120 VAC ± 5%.
Runtime: ~12 minutes at half load; ~2 minutes at full load.
Outlets: 12 total — 6 are battery-backup + surge protected, 6 are surge-only.
USB Charge Ports: 1 × USB-A (2.4 A) + 1 × USB-C (~18 W PD).
Battery: 2 × 12 V / 9 Ah sealed lead-acid. Replacement battery cartridge: RB1290X2E. Typical recharge time ~8 hours.
Dimensions: ~25.91 cm (W) × 35.0 cm (H) × 10.01 cm (D); Weight ~10.8 kg.
Transfer Time: ~4 ms typical.
CYBERPOWER UPS & AVR CP1500AVRLCDTAA
FEATURES
Line-interactive topology with AVR
Uses AVR to maintain steady voltage and reduce unnecessary battery use.
Simulated sine wave output
Battery mode output is a stepped approximation of sine wave.
Surge + battery protection
Protects sensitive equipment from surges and provides backup power.
Multifunction LCD interface
Displays input/output voltages, battery charge, load, and alerts.
Data line protection & filtering
Includes Ethernet/coax protection and EMI/RFI noise filtering.
SPECIFICATIONS
Topology: Line Interactive
Capacity: 1500 VA / 900 W
Battery Configuration: 2 × 12 V / 9 Ah
Runtime (Full Load): ~3 minutes
Runtime (Half Load): ~12 minutes
Recharge Time: 8 hours
Plug Type: NEMA 5-15P
Cord Length: 6 ft (1.8 m)
Voltage Range: 90 VAC – 142 VAC
Output Voltage: 120 VAC ± 5%
Transfer Time: 4 ms
Communication Ports: USB, RS-232
Surge Suppression: 1500 J
