Hikvision- DS-PR1-WE(B)

Wireless Intrusion Alarms Model

HIKVISION WIRELESS INTRUSION ALARM DS-PR1-WE(B)

FEATURES

Wireless Range Extension
Acts as a range extender / repeater for AX PRO alarm system, boosting RF communication coverage over greater distances.
Two-Way Communication & Protocol Support
Supports two-way wireless transmission over 868 MHz and is compatible with Tri-X and Cam-X wireless protocols.
Auto-Pairing & Device Linking
Capable of automatically discovering and pairing with up to 8 PIRCAM sensors or smoke detectors to simplify setup.
Battery Backup for Power Loss
Includes built-in lithium battery to maintain operation for a limited duration (up to ~24 hours in the “Plus” version) when mains power is lost.
LED Status Display
Equipped with LED indicators showing registration/signal, power, and fault status to aid diagnostics.
Tamper Protection & Security
Has front and rear tamper detection. Uses AES-128 encryption to secure wireless communication.

SPECIFICATIONS

Model: DS-PR1-WE(B)
Wireless Frequency: 868 MHz two-way communication
Modulation: 2GFSK
Battery Backup (when mains lost): Up to 24 hours (typical)
Power Supply: 100 V AC to 240 V AC (mains)
Operating Temperature: –10 °C to +55 °C (Battery may not charge below 0 °C)
Operating Humidity: 10% to 90% non-condensing
LED Indicators: 3 (Register/Signal, Power, Fault)
Tamper Protection: Front and back tamper detection
Auto-Pairing & Device Support: Supports auto-pairing; can link with up to 8 PIRCAM or smoke detectors
Dimensions (W × H × D): 150 mm × 150 mm × 25 mm
Weight: ~372 g
Shell Material / Color: Plastic, white

HIKVISION WIRELESS INTRUSION ALARM DS-PS1-E-WE

FEATURES

Wireless Outdoor Siren
The DS-PS1-E-WE operates on 868 MHz two-way RF with AES-128 encryption, providing secure and reliable communication with the control panel. Its design allows flexible placement for outdoor alerting.
High-Volume Audible and Visual Alerts
It delivers a loud 110 dB buzzer and includes a strobe light for visual alarm indication. This ensures intruders are deterred and occupants are alerted immediately.
Long Battery Life
Powered by four CR123A batteries, the siren can last up to 3 years under typical conditions. It also supports a 12 VDC power supply for alternative installation options.
Tamper Protection
Equipped with front and rear tamper detection, the device can trigger alerts if unauthorized access or removal is attempted. This enhances the overall system security.
Durable Outdoor Design
Housed in a PC+ABS shell with IP65 rating, the siren is suitable for various weather conditions. Frequency hopping prevents jamming and maintains consistent performance.

SPECIFICATIONS

RF Frequency: 868 MHz, 2GFSK, two-way
RF Range: up to 1.6 km open area
Encryption: AES‑128, frequency hopping
Battery Life: Up to 3 years (triggered every 2 weeks with 90 s actions) via 4× CR123A or 12 V DC
Static Consumption: 30–40 µA; Alarm current: 4 A @ 3 V or 1.3 A @ 12 V
Sound Pressure Level: 110 dB
Tamper Protection: Front & back tamper switches
Operation Temp/Humidity: –20 °C to +60 °C; 10–90% RH (non-condensing)
Ingress Protection: IP65
Dimensions: 190 × 200 × 47.3 mm; Weight ~606 g
Shell Material: PC + ABS

HIKVISION WIRELESS INTRUSION ALARM DS-PS403I-WB

FEATURES

Full Duplex Intercom
Allows two-way voice communication for alarm verification or voice prompts.
Configurable Sounds & LED Indicators
Supports various sound prompts and LED status indications (enrollment, alarm, intercom) configurable remotely via app.
High Sound Output
Produces up to 105 dB in alarm mode and up to 85 dB in intercom mode (measured at 1 m).
Wireless & Remote Control
Operates on 433 MHz two-way communication (CAM-X wireless) with remote configuration via the AX PRO app.
Tamper Protection & Wall Mounting
Includes tamper detection (cover removal) and is designed for wall mounting.
Supports External Power Supply
Can run on battery or optionally accept 12 VDC external power input.