Hochiki- FIRESWITCH 108 - 10AMP NAC BOOSTER

  HOCHIKI FDAS FIRESWITCH 108 - 10AMP NAC BOOSTER  

FEATURES

• High-capacity NAC expansion for fire panels

• This booster is designed to interface with 12 VDC or 24 VDC fire alarm control panels (FACPs) to expand notification appliance circuit (NAC) capacity—enabling additional horns/strobes or ADA-compliance devices.

• Configurable outputs with multiple modes

• The unit offers eight outputs (programmable as Class B or paired for Class A) and supports selectable output modes—Steady, Temporal Code 3, Strobe Synchronization, or Follower Mode (output mirrors input).

• Fully supervised and network-ready

• Each output is supervised for open/short/ground fault, the unit integrates LCD status display and Ethernet port for remote monitoring/programming, and supports ground-fault detection and form “C” relay trouble outputs.

• Battery backup and power regulation

• Includes internal battery charger, automatic switch-over to standby batteries, regulated 24 VDC output, and is capable of zero-voltage-drop switchover in an outage.

• Synchronization and compatibility with major devices

• Supports synchronization protocols for major brands (Gentex, System Sensor®, CooperWheelock®), enabling horn/strobe coordination, 2-wire horn/strobe mode, and CO Temporal Code 4 support.

SPECIFICATIONS

• AC Input: 120 V AC, 60 Hz, 4.8 A max (as per spec sheet)

• Output Voltage: 24 V DC regulated for NACs

• Maximum Alarm Current (Total): 10 A

• Maximum Stand-by Current (Without Battery): 7 A (without battery backup)

• Maximum Current Per Output Channel: 2.5 A

• Auxiliary Output: 1 A regulated 24 VDC (with battery backup)

• Operating Temperature: 0 °C to +49 °C (32 °F to 120 °F)

• Dimensions (H × W × D): 15.5″ × 12″ × 4.5″ (~393.7 mm × 304.8 mm × 114.3 mm)

• Weight: ~12.4 lb (5.62 kg) net

• Listings: UL 864, UL 2017, CAN/ULC-S527-99, FM, CSFM approved

  HOCHIKI FDAS HHLFR - LOW FREQUENCY HORN, 24VDC, WALL MOUNT  

FEATURES

• High Performance Low Frequency Output

• Produces a 520 Hz tone designed to meet NFPA 72 requirements for sleeping area notification.

• Low Current Consumption

• Optimized circuitry provides efficient operation while maintaining high sound output levels.

• Multiple Tone and Volume Settings

• Selectable sound patterns and volume levels allow flexibility for different environments.

• Easy Installation and Wiring

• Features universal mounting plate and quick-connect terminals for faster installation.

• Aesthetically Designed Housing

• Compact, modern housing with red finish blends with building interiors while meeting visibility requirements.

• UL Listed for Fire Protection Use

• Meets UL464 and NFPA 72 standards for audible notification appliances.

SPECIFICATIONS

• Model: HHLFR

• Type: Low Frequency Horn, Wall Mount

• Operating Voltage: 16 – 33 VDC (nominal 24VDC)

• Sound Output: Minimum 75 dBA @ 10 ft (520 Hz)

• Current Draw: Up to 90 mA @ 24VDC (depending on setting)

• Frequency Output: 520 Hz ± 10%

• Synchronization: Compatible with Gentex sync protocols

• Mounting: Standard 4” square or single-gang box

• Housing Color: Red

• Dimensions: 5.3” H x 4.6” W x 1.9” D

• Operating Temperature: 32°F – 120°F (0°C – 49°C)

• Humidity: Up to 90% RH non-condensing

• Compliance: UL464, NFPA 72, ADA compliant

  HOCHIKI FDAS SPC-24 - BEAM DETECTOR  

FEATURES

• Projected-beam detection for large open spaces

• The SPC-24 uses separate emitter and receiver units to monitor a beam of light across distances up to ~328 ft (100 m) so it’s suitable for atria, high ceilings, warehouses, tunnels and other areas where spot detectors may be inefficient.

• Microprocessor-based stability with automatic signal compensation

• It features microprocessor control that stores the initial beam intensity, monitors variations, and includes automatic compensation for lens contamination or signal drift to maintain reliability over time.

• Simple field alignment and configurable sensitivity

• The unit provides signal-strength LEDs to assist installation alignment and supports three field-adjustable obscuration/sensitivity settings so it can be tuned for the specific area layout.

• Dual-contact output for alarm and fault reporting

• Provides Form A (alarm) and Form B (trouble) relay contacts for integration into fire panels and control systems.

• Colour-coded units for ease of installation and service

• Emitter and receiver units are colour coded (e.g., red & green) to avoid confusion during installation or servicing.

SPECIFICATIONS

• Product Code: 0200‑03460

• Operating Voltage: 19–33 VDC, nominal 24 VDC supply

• Standby Current: ~200 µA (receiver); 50 µA (emitter)

• Alarm / Trouble Current (receiver): ~20 mA each

• Coverage Range: 32.8–328 ft beam span, covers 60 ft on-center

• Dimensions: ~3.2″ W × 5.5″ H × 4.0″ D

• Operating Temp: 14 °F–122 °F (–10 °C to 50 °C); UL-listed installation up to 100 °F

• Humidity: Up to 95% RH (non-condensing)

• Mounting: Wall mount or single-gang box

• Certifications: UL 268 listed; California State Fire Marshal #7260‑0410:172