Honeywell- ES-200X Fire Alarm Control Panel with Communicator

  HONEYWELL FDAS ES-200X FIRE ALARM CONTROL PANEL WITH COMMUNICATOR  

FEATURES

• Integrated Dual-Path Communicator

• Built-in IPOTS‑COM module provides both POTS and IP pathways for central station and remote monitoring.

• Single Signaling Line Circuit (SLC) Supporting 198 Devices

• Supports up to 99 detectors and 99 modules on one SLC loop for compact installations.

• Offline and Local Programming via FS‑Tools

• Programming via USB or Ethernet using FS‑Tools, enabling upload/download of programming, event logs, and system data.

• Four NAC Circuits with Flexible Synchronization

• Each NAC is programmable as Class A or B and supports temporal, continuous, and synchronized output.

• Comprehensive Alarm and Maintenance Features

• Includes alarm‑verification logic, pre‑signal options, sequenced evacuation (PAS), sensitivity monitoring, and one‑person walk test.

SPECIFICATIONS

• Addressable Points Supported: Up to 198 devices (99 detectors + 99 modules) on one SLC

• Communications: Built-in POTS/IP communicator, optional cellular path

• NAC Outputs: 4 independent circuits (Class A/B), total max 2.7 A (2.5 A per NAC)

• Relays: 2 programmable Form‑C plus one fixed trouble relay

• Display Interface: Integral LCD (approx. 80‑character) with status LEDs

• Programming Ports: USB and Ethernet, FS‑Tools compatible

• History Capacity: Up to 1,000 stored events

• Power Supply: Internal transformer and regulated power supply

• Listings: UL 864 9/10th Edition listed; NFPA 72 compliant

  HONEYWELL FDAS NFS2-640E  

FEATURES

• Modular Addressable System Optimized for Mid‑Size Installations

• Supports up to ten SLC loops and scalable between small standalone or networked systems.

• ONYX Intelligent Sensing & FlashScan Protocol

• Nine sensitivity levels with drift compensation, auto detector testing, and ultra-fast response (<2 s polling, <5 s output activation).

• Large User-Friendly Display & Onboard Programming

• Features a 640‑character backlit LCD and remote programming via USB or VeriFire Tools.

• Audio & Mass Notification Integration

• Optional voice, fire fighter telephone, and analog or digital audio compatible with ONYXWorks systems.

• High‑Efficiency Power Supply & Battery Monitoring

• Built-in 3.0 A PSU (6.0 A in alarm), automatic battery monitoring, and onboard charger for large battery banks.

SPECIFICATIONS

• Signaling Line Circuits (SLCs): 1 standard, expandable to 2 isolated loops (FlashScan or CLIP)

• Device Capacity: Up to 318 devices per loop, with networked support up to 3,180 devices

• Power Supply:

• 120 VAC model: 3.0 A (6.0 A in alarm)

• 240 VAC model (‑E): 1.5 A (3.0 A in alarm)

• Notification Appliance Circuits (NACs): Four Class A/B outputs, synchronized and programmable (max 1.5 A each)

• Protocols Supported: FlashScan, CLIP; NICET/NFPA compliant

• Listing & Approvals: UL 864, UL 2572 Mass Notification, ULC, CSFM, MEA, ADA compliant

  HONEYWELL FDAS MS-4 FIRE ALARM CONTROL PANELS  

FEATURES

• Four-Zone Input with Programmable Flexibility

• Provides four initiating zones—one can be configured for supervisory/waterflow monitoring.

• Dual NACs with Sync Protocols and Selective Silence

• Two synchronized NAC circuits support System Sensor, Wheelock, or Gentex appliances with horn mute/strobe continue capability.

• Expandable to Class A Circuits with Accessory Module

• Optional converter module provides Class A configuration for initiating and NAC circuits for fault-tolerant installations.

• i3 Smoke Detector Support for Maintenance Alerts

• Compatible with System Sensor i3 device features including cleanliness and freeze status feedback.

• Walk Test Mode Included

• Silent or audible walk-test options and automatic return to normal operation after one hour.

SPECIFICATIONS

• Zones Supported: 4 conventional zones, Zone 4 programmable for fire/supervisory/waterflow

• NAC Outputs: 2 synchronized NACs, selective silence feature supported

• Power Supply: 3.0 A total output at 24 VDC (expandable to 6.0 A with optional transformer)

• Detector Compatibility: System Sensor i3 series and standard conventional initiating devices

• Optional Features: Compatible with Class A converter (CAC‑5X), remote annunciator module (4XLMF), relay module (4XZMF)

• User Controls: Front panel LEDs, LED indicators per zone, zone/test/reset buttons

• Listings: UL, FM approved; supports NFPA 72 conventional system role