Honeywell- J2351 Intelligent Photoelectric Smoke Detector

  HONEYWELL FDAS J2351 INTELLIGENT PHOTOELECTRIC SMOKE DETECTOR  

FEATURES

• Advanced Photoelectric Sensing

• Enhanced optical sensing chamber provides rapid and accurate smoke detection.

• Intelligent Communication

• Fully compatible with Johnson Controls panels, supporting CLIP and FlashScan protocols.

• False Alarm Reduction

• Minimizes false alarms caused by dust or environmental factors.

• Easy Maintenance

• Removable chamber simplifies cleaning and servicing.

• Durable Construction

• Built to perform reliably in challenging environmental conditions.

SPECIFICATIONS

• Voltage Range: 15–32 VDC

• Standby Current: 300 µA at 24 VDC

• Alarm Current: 6.5 mA at 24 VDC

• Operating Temperature Range: 0°C to +49°C (32°F to +120°F)

• Humidity Range: Up to 93% RH (non-condensing)

• Dimensions: 4.1" diameter × 2.1" height

• Weight: Approximately 0.5 lbs (227 g)

• Mounting: Plug-in type with separate base (e.g., B501)

• Certifications: UL 268 Listed, FM Approved, CSFM 7272-0028:0206

  HONEYWELL FDAS 5193 SERIES V-PLEX® ADDRESSABLE SMOKE DETECTOR  

FEATURES

• Advanced Addressable Smoke Detection

• Uses Honeywell’s V-Plex® polling loop technology to provide reliable addressable communication with fire alarm control panels.

• Photoelectric Sensing Technology

• Delivers fast and accurate detection of visible smoke from smoldering fires while minimizing false alarms.

• Automatic Drift Compensation

• Continuously adjusts sensitivity to compensate for dust accumulation, ensuring consistent performance.

• Low Profile and Aesthetic Design

• Compact design blends seamlessly into any environment for both residential and commercial installations.

• Easy Installation and Maintenance

• Features a removable smoke chamber and simple address setting for quick setup and servicing.

SPECIFICATIONS

• Model: 5193 Series

• Type: Addressable Photoelectric Smoke Detector (V-Plex® Loop)

• Operating Voltage: 12VDC nominal (V-Plex® communication)

• Current Draw: 350 µA (standby)

• Alarm Indication: Red LED (steady in alarm)

• Operating Temperature: 32°F to 100°F (0°C to 37.8°C)

• Humidity Range: 0–95% RH, non-condensing

• Dimensions: 2.0" H × 4.1" Dia.

• Mounting: Standard electrical box

• Compliance: UL268, NFPA 72, CSFM, FCC Part 15

• Compatible Panels: Honeywell/Ademco V-Plex® addressable systems

  HONEYWELL FDAS NOTIFIER OSI INTELLIGENT BEAM DETECTOR  

FEATURES

• Long-Range Beam Detection

• Designed for large, open spaces such as atriums, warehouses, and auditoriums where traditional point detectors are impractical.

• Intelligent Addressable Design

• Integrates with Notifier intelligent fire alarm systems for precise monitoring and control.

• Automatic Alignment and Compensation

• Utilizes microprocessor-controlled optics for easy setup and continuous alignment adjustment.

• Selectable Sensitivity Levels

• Offers multiple sensitivity settings to suit environmental conditions and reduce nuisance alarms.

• Built-In Fire and Fault Indicators

• LED and control panel indications for fire, fault, and contamination status.

SPECIFICATIONS

• Model: OSI Series

• Type: Intelligent Reflective Beam Smoke Detector

• Operating Voltage: 24VDC

• Current Consumption: Normal 20mA, Alarm 38mA

• Detection Range: 16.5 to 328 ft (5–100 m)

• Beam Spread Angle: ±0.5°

• Sensitivity Settings: Selectable via panel or software

• Operating Temperature: 32°F to 100°F (0°C to 38°C)

• Humidity: 0–93% RH, non-condensing

• Compliance: UL268, FM Approved, CE Certified

• Application: High-ceiling or large-area smoke detection