Honeywell- Thermostats-BACnet® Fixed Function
HONEYWELL BUILDING MANAGEMENT SYSTEM THERMOSTATS BACNET® FIXED FUNCTION
FEATURES
Out-of-the-Box Functionality with BACnet® Simplicity
These fixed function thermostats offer BACnet® MS/TP connectivity with preconfigured control sequences for heating, cooling, and fan coil applications.
Low-Complexity Setup with High Reliability
Designed for fast deployment without programming, they reduce commissioning time in multi-room and facility-wide installations.
SPECIFICATIONS
BACnet® MS/TP communication
Preloaded control applications
Optional occupancy and CO₂ sensors
Configurable parameters via onboard interface
Compatible with 2-pipe and 4-pipe systems
Wall-mounted design with clear display
HONEYWELL BUILDING MANAGEMENT SYSTEM ZONEPRO™ THERMOSTAT
FEATURES
Advanced Zoning Thermostat with Flexible Control
ZonePRO™ thermostats provide precise temperature and humidity control for zoning systems, packaged with network-ready BACnet® capability.
Fully Configurable for Custom HVAC Applications
With multi-stage control, dehumidification, and remote sensor support, it's ideal for critical comfort control in complex commercial buildings.
SPECIFICATIONS
BACnet® MS/TP and Modbus RTU support
Configurable for heat pump, VAV, or fan coil
Up to 4 heat/2 cool stages supported
Inputs for remote sensors and occupancy detection
Keypad lockout and configurable display
Dual setpoint control and scheduling
HONEYWELL BUILDING MANAGEMENT SYSTEM VGF SERIES FLANGED GLOBE VALVES
FEATURES
Flanged globe valve series
Designed for 2-position or modulating control of steam, hot water or chilled water in closed-loop HVAC systems.
Large size range and cast-iron body
Available in sizes 2½″ to 6″ (DN65 to DN150) with cast iron body (ASTM A126 Class B) and ANSI flange standards.
High integrity seating and pressure-balanced designs
Features metal-to-metal seats for long life span, differential pressure rating up to 175 psi, with ANSI Class IV leakage in pressure-balanced models.
Mixing or diverting three-way variants available
Offers both 2-way and 3-way flow patterns with equal-percentage and linear characteristics.
SPECIFICATIONS
Body types: ANSI Class 125 and Class 250 (depending variant).
Sizes: 2½″ (DN65), 3″ (DN80), 4″ (DN100), 5″ (DN125), 6″ (DN150).
Max steam inlet pressure: up to 100 psig (≈689 kPa) for steam service.
Differential pressure rating: up to 175 psi for 2-way valves in many cases.
Rangeability: 50 : 1 typical.
Leakage rating: For pressure-balanced models: ≤ 0.01% of Cv (ANSI Class IV).
Flow characteristics: Equal percentage (EP) or Linear (L) depending variant; mixing (EM) or diverting (LD) for 3-way.
Body material: Cast iron (ASTM A126 Class B) for major body; trim/plug often stainless-steel.
Control media: Water up to 60% glycol solution; saturated steam (2-way models) up to 100 psig.
